Kerbready London › Bromley

Dropped kerb in Bromley: cost, rules and approval checklist

Checked against Bromley Council's policy and website on 19 November 2026

Bromley adopted a new crossover policy on 12 January 2026, with strict limits on width. Your whole crossover must sit within your own frontage, even if that makes it narrower. At £100, its application fee is among the lowest in London.

This page covers homes in Bromley, Beckenham, Orpington, Chislehurst, Penge and West Wickham. Bromley's highways team assesses applications. If approved, the council's highways contractor builds the crossover and you pay the full cost.

The rules at a glance

Parking space

A solid, even, unobstructed surface at least 4.5m deep from the back of the pavement and 2.4m wide throughout.

Standalone crossover

At most 3m of flat kerb, with 0.9m sloping kerbs either side: 4.8m overall. Refused if there is not at least 3.6m available.

Shared crossover

At least 2.4m of flat kerb with a 0.6m sloping kerb at the end, and at most 3.9m of flat kerb.

Within your frontage

The full width of the works must be within your own property boundary and must not overlap your neighbour's, even if that means a smaller crossover.

Street trees

The council's tree officer sets a minimum root protection area around each street tree. Well-established trees are not removed.

Materials

The standard surface is concrete block paving.

What a dropped kerb costs in Bromley

If you are refused

Bromley's decisions on trees can be appealed: in a 2020 case the council reviewed a refusal with a senior tree officer, upheld it, and offered to refund the £100 fee because of its delays. In a 2026 case the Ombudsman declined to look at a complaint where the council approved a crossover by mistake and then withdrew approval after the resident had done works, saying the matter was one for the courts. Get final written approval before you build anything.

Before you pay the application fee

  1. Measure from the back of the pavement: under 4.5m deep or 2.4m wide means refusal.
  2. Measure your own frontage width: you need at least 3.6m for a standalone crossover, all within your boundary.
  3. Plan for no more than 3m of flat kerb, or 3.9m if shared with a neighbour.
  4. Check for a street tree near the crossover position and ask how large its root protection area is.
  5. Do not build your driveway until you have final written approval.

How Bromley compares with its neighbours

CouncilApplication feeMinimum parking spaceStreet tree rule
Bexley£574.8m × 2.4mRemoved only if unhealthy or under three years old
Croydon£158Not publishedNot published
Lewisham£148Not publishedNot published

Related guides